How to NOT get brushstrokes with Fusion Mineral Paint

August 01, 2018

How to NOT get brushstrokes with Fusion Mineral Paint

HOW TO NOT GET BRUSH STROKES WHEN PAINTING



TIPS FOR AVOIDING BRUSH STROKES WHEN PAINTING FURNITURE AND CABINETS

Everyone is always asking us, how can I paint and not get brush strokes? We all want that smooth finish. Now, Fusion Mineral Paint is already self-leveling helps a lot when it comes to a great finish overall. But would you believe a brush stroke free finish really starts with your tools? Choosing the right brush for the job is key to achieving this look. Today’s blog post is going to teach you how to not get brush strokes when painting furniture and cabinets in your home.

GOOD BYE BRUSH STROKES!

So here is how we at Fusion get the perfect brush stroke free finish when we are painting:

1. Choose the right paintbrush

Every project is different and everyone’s hands are different. You need to find a brush that you can hold well and that is comfortable in your hands. We love Cling On brushes! There is no comparison to these.Cling On brushes are made from a unique synthetic / natural bristle blend that has a short natural china bristle, blended with a longer, silky synthetic bristle. The natural bristle ensures better paint absorption and the synthetic bristle component allows for a smooth, even application having minimal to no brush strokes. 

2. Apply the proper amount of paint on your paintbrush

One of the biggest mistakes people make is that they tend to put gobs of paint on their paintbrush and then have a thick coat of paint on their surface. This is one of the quickest ways to create brush strokes on your furniture or cabinets. Repeat to yourself: less is more!

Dip your paintbrush into the container, then gently remove excess paint on the brush on the edge of the container.

Your first layer of paint should be a thin coat. Don’t panic if you don’t see full coverage, especially when going from a dark to light colour. Layering is what will help ensure a smooth finish. Think of it like nail polish. You apply one base/initial coat. Then another thin layer, then another until your preferred look is achieved. The more you put on initially, the longer the drying time and room for mistakes (like pooling paint and uneven surfaces). 

How many of us have done the following while painting: imagine you’re painting a rectangular surface. You start on one area, such as the left-hand side, finish painting that area and then start on the right side. As we move to the right side, we notice the left side is drying and wrongly assume that it is splotchy (due to how it looks as it dries)and needs more paint. So we go back over to the left side to put more paint on before we even tackle the right side.

Don’t do this. Paint end to end to avoid brush strokes. Whether you’re painting a round table top or a picture frame, do not stop half way through your surface and go back the edge. Carry that brush with paint all the way to the other side. This prevents that dreaded line in the middle of any project and ensures that your paint is consistently the same depth all the way across. Going back over an area that you just painted is what creates textures and you guessed it, causes brush strokes.

For extra big pieces, obviously, this can be a challenge. This is where choose the right paint tool for the job becomes important (Step 1!!) as you would most likely switch to a roller instead of a brush, to move efficiently from side to side.

TIP: As you finish your paint layers, give them a quick look over and make sure there are no runs or any pooling. If all looks well, let your surface completely dry before doing your second coat. Fusion is dry to the touch after 2 hours and can accept a re-coat after 4 hours.

And there you have it! How to avoid brush strokes when painting furniture or cabinets. 

**All content has been duplicated from Fusion.com**





Leave a comment


Also in News

Fusion Mineral Paint Top Coats
Fusion Mineral Paint Top Coats

August 07, 2018

Learn how, when and what top coat to use on your Fusion Mineral Paint projects

View full article →

Our New Shop Front
Our New Shop Front

June 04, 2018

We have opened our NEW SHOP FRONT!!

Read about the process and celebrate the end result!

View full article →

How to prevent bleed through
How to prevent bleed through

March 11, 2018

How to prevent the dreaded bleed through!

View full article →